Spare part, battery compartment cover for Navigator Blue

• Loco decoder for digital and analog operation
• 14, 28 and 128 speed steps
• 1,8Amps motor output
• Output for a RC-Servo
• Bus-Interface for MASSOTH and LGB® modules
• Programmable driving curve
• Start, mid and maximum speed adjustable (incl. lag times)
• Serial and parallel data processing for all light and function outputs
• Control of parallel updated modules (LGB®)
• Digital and analog operation with automatic detection
• Compatible with NMRA DCC and LGB® MTS (all generations)
• Latest generation back-EMF (digital and analog)
• Adjustable motor frequency (90Hz - 23,5 kHz)
• 2 light outputs (front, rear) max. 0,5Amps each
• 6 functions outputs (2 with 0,5Amps each , 4 with 50mAmps each)
• Dimmable light and function outputs, activatable in analog
• Programmable flashing light function and short term function
• Switching speed and lag times activatable with function key
• Easy function mapping with direction assignment
• All function outputs freely addressable (F1 to F16)
• Terminals for power buffer for smooth and steady operation integrated (Item No.: 8151001 or 8151501)
• Overload and thermal protection for motor and function outputs
• Reset function for all CV-values
• CV-reading
• CV-writing
• CV-writing bit-by-bit
• CV indirect programming (by register programming for old digital sytems)
• Direct register programming (CV 1 - CV4)
• POM - Programming-on-Main (Programming on main track)

In 2021 we replace the former red traction tires 8315105 (Ø37,5mm) and 8315205 (Ø46,5mm) with 5 pieces each in the scope of supply by new, transparent traction tires in original manufacturer quality, as they are used also with garden railway manufacturers ex factory.

Traction Tires Ø37,5mm (8/pack) compatible with LGB 69104, E126174

Modelltrain Oil

With the MM1 graphite lubricant (graphite grease) in the practical dosing tube contact problems in track connections of indoor and outdoor layouts belong to the past.

Gear grease

Description

With the pantograph drives for single-arm and scissors-type pantographs, locomotives can be retrofitted with a sophisticated drive system. The drive is not limited to the familiar single-arm pantographs (8440013), such as on the Ge 4/4 II and Ge 4/4 III. The new drive is designed in such a way that, for the first time, scissor pantographs (8440023) can also be operated. This makes it possible to retrofit the drive e.g. for the Krokodil (2040x) or the Schnüpftrückerli (2045x). And of course, old or defective drives can now also be replaced. A special feature is the pleasantly slow and descriptive speed when raising and lowering the pantographs. Here, they are not opened and closed like a jackknife. And thanks to the integrated spring mechanism, the pantograph can be raised or lowered manually without damaging the mechanism.

Description

Are you a garden railroader and would like to switch blades on your garden railway as slow as real tracks do? This, as well as many other functions, is now possible with the new EVO-S Switchdrive mechanism from Massoth. With the EVO-S, Massoth has not only improved the switch drive, but practically reinvented it and filed a patent application for the unique product concept. What makes it so unique? It offers the typical slow drive, and at the same time the possibility to push open the switch blades from the frog. The EVO-S is the only drive that can switch the drive back to the previous position after opening the blades. Alternately, the drive can be configured in such a way that the switch blades fit closely against the tracks.

The EVO-S is the smallest series-produced drive with an additional integrated decoder and is suitable for all types of switches of any common manufacturers. The DCC decoder supports digital and analog operation without much programming effort, for use directly out of the box. This makes it very suitable for digital beginners.

The required final position of the switch blades does not have to be programmed, as the drive adjusts all by itself every time. Up to 12mm travel is possible, which is sufficient for all standard switches. A manual fallback switch function can be activated for one of the two switching directions at a time. And, of course, the drive shifts very silently. The EVO-S would not have been suitable for outdoor use if it had not been especially designed for this purpose

Please note the electronics are not located to the base of this unit which means there will be no ingress of water to the unit as this is floating in an air cushion and sealed to protect it from both water and humidity therefore keeping the electronics dry at all times protecting the drive system fully from both elements. Should any rain get into the EVO-S it is drained out and the unit can be used as normal when done. Should the the motor fail it can be easily replaced by routine uncomplicated servicing.

For the first time, a switch drive combines robust drive technology with many refinements, in an unprecedented housing design. Compared to the EVO-S, the EVO-X offers various additional advantages:

Range of functions of the EVO-X:

• frog polarisation
• fully automatic fallback switch function
• spring switch function (real detection of cutting)
• Contact output with feedback function at:
  – incoming of the digital switching command
  – incoming of the digital switching command and interrogating the limit sitch
  – cutting open and interrogating the limit switch
• heated switch drive (actuating mechanism)
• connection for an external switch tongue heating unit
  (alternatively usable as function output)
• digital DCC operation only

furthermore includes the range of functions of the EVO-S:

• digital operation thanks to integrated decoder
• especially small and compact design
• freewheel function for cutting (can be switched off)
• fixed switch tongue can be activated with only one CV
• manual fallback turnout function
• real outdoor suitability due to innovative housing construction
• no switch travel adjustment due to self-adjustment
• direct operation out of the box, without programming effort
• Ideal for digital beginners
• and much more